Surface Mount Rework and Repair Soldering Kit
Part # CTI-SMT

Beginners will find this soldering kit offers a wide variety of the common and some not so common surface mount devices. This SMT soldering kit will familiarize the student with component placement, polarity recognition and soldering techniques. Experienced solder-ers will be able to refine and demonstrate their expertise.

The board is .062” thick, HASL finish with double sided metallization with duplicate land patterns on the secondary side.

Soldering Kit Components

Component Type	Number of Components
1206 Resistors/Capacitors	8
0805 Resistors/Capacitors	10
0603 Resistors/Capacitors	17
0402 Resistors/Capacitors	15
Small Outline Transistors (SOT 23)	8
14 Pin SOIC (50 mil pitch)	2
20 Pin SOICW (50 mil pitch)	2
PLCC 28 (J Leads)	2
PLCC 68 (J Leads)	2
QFP 100 (25 mil pitch)	2
QFP 160 (25 mil pitch)	2
TQFP 100 (20 mil pitch)	2
TSOP 32 (20 mil pitch)	2
C Case Tantalum Capacitors	5
QFN-24	2

Cost for solder training kit SMT
No orders for less than 10 of these kits will be accepted.

10-50 $50.00 per
51+ $45.00 per

Optional: We offer a SMT Rework student training guide to accompany this soldering kit. This is a 30 page professionally bound student guide covering basics of soldering (melting points, intermetallic bonding), acceptance criteria as defined by IPC, product classifications, introduction to soldering, chip component ,SOIC, QFP and JLEAD removal/replacement along with tip selection, tip care and component identification and polarity recognition. A course evaluation and contact form are including as well to give the instructor feedback on this program. Sample page from guide.

1-10          $55.00
11-50        $50.00
51+           $45.00

If you do not find the solder training kit you need or would like to discuss training options please feel free to contact us using the contact information below.

Circuit Technology, Inc.
340 Raleigh Street
Holly Springs, NC 27513
(919) 552 3434 Phone
(919) 552 2772 Fax
kits@circuittechnology.com